I was just curious enough to conduct my own experiment.
The following computer was used to simulation: PC Intel core i5-1035G1 CPU 1.00GHz, 8. But one of the two actions, polishing or the occlusion relief slotting, seems to have done it. 6 v6.9 (Build 6.9.1.134) (x86,圆4) Serial port simulator. I had the beginnings of cold stiction before and this winter we had a very bad for Texas winter and it never missed a beat on cold starts. I'm at 95K miles now and it has not missed one time. I was considering a full Motorcraft reman'd set anyway. I had nothing to lose but my time and the cost of seal kits. I also polished the spools with 1000 grit paper and reassembled. In the stage one cohort of 15 patients, 7 (46.7) reported best overall response (BOR) of partial response (PR), hence the trial proceeded to recruit. I took the injectors out and and ground a slot on the spool closed end. Efficacy and safety of the Phase 2 trial. I had an intermittent miss when towing that could never be captured.įInally at 77K miles when I developed a dummy plug leak I decided to explore. I bought a FOMOCO display vehicle (2006 F450 C&C) that had likely been cranked and run 10 minutes or less dozens if not hundreds of times in the 1500 miles it had on it when I bought it.
